The 36P1 Series of power controls is a three phase controller available in 120 thru 575vac with current ratings from 20 to 600A. Using six SCRs in a three phase AC switch configuration, it provides smooth phase angle control for 0-100% output power. It comes standard with an isolated 4-20ma signal input, a manual potentiometer input and Load Voltage Regulation. The integral offset and gain adjustments allow tailoring of the output power with respect to the control signal input. Optional features such as Current Limit and Current Trip are also available.
AC Supply Voltage: 120 - 575 Vac
Amp Ratings: 25 to 600 Amps
Control Signal: 4 to 20ma, 10 to 50mA, 1 to 5mA, 0 to10 Vdc
AC Supply Voltage: | Operates within 120,208,380,415,480 or 575VAC ±10% |
Line Frequency: | 50/60 Hz. |
Output Current Rating: | 25 to 600 amps model dependent |
Higher currents available, consult factory | |
Command Inputs | |
Automatic: | 4-20mA (510 Ohm), 10-50mA (200 Ohm) ,1-5mA (2k Ohm), 0-10VDC (100K Ohms Min.) |
Manual: | 10K, 2 Watt potentiometer |
Output Voltage: | 0 to 98% of input voltage |
Output Stage: | 6 SCR configuration (3 phase AC switch) |
Load Types: | Resistive, inductive, transformer, and lamp |
Adjustments: | 5 cycles to 30 seconds Accommodates most milliamp signals |
Current Limit: | 10 - 125% of controller rated current |
Current Trip: | 75 - 200% of controller rated current |
Regulation: | Maintains output within 2% with a ±10% line variation up to 90% of line voltage |
Ambient Temperature: | 0 to 40°C at rated current (From 50°C to a maximum of 60єC, the output rating decreases by 10% for each 5°C increase.) |
Protective Features: | I²t Fusing Transient voltage suppressor (MOV) dv/dt Networks |